Omega Cantilever System

Worktop supported by heavy-duty steel frame - Under-bench units can be repositioned - Large range of under-bench storage units

In this design the worktop is supported by a heavy-duty steel frame and the under-bench units are independent. Cupboard and drawer units can be placed exactly where they are needed. If the laboratory layout needs adjusting the under-bench units and can be moved and repositioned (although the storage units need to be unloaded to do this). Where a sink is located the cupboard will normally be fixed in position.

Standard worktop widths are 600, 750, 900mm for perimeter benches and 1200, 1500 and 1800mm for peninsula and island benches. Worktops are usually 900mm high in laboratories, and 750mm high in write-up areas.

Construction

Worktop supported by 60 x 40 x 3mm thick epoxy powder coated steel frame.

Exterior carcass panels made from 18mm thick melamine faced MDF.

All exposed edges lipped with 3mm PVC edge-band.

Choice of worktop materials to suit your requirements.

Choice of sink types and sizes to suit your requirements.

270 degree self-closing, heavy-duty, adjustable hinges.

One piece, full width aluminium handle. Epoxy powder coated to a colour of your choice. 'D' style handles also available.

Cupboard and drawer fronts either light grey (standard) or a colour of your choice.

Omega Pedestal system Omega Moveable System Omega Suspended System Omega Trespa System

Serviced Pedestal System Serviced Pedestal System Serviced Pedestal System Serviced Pedestal System