APMG home > fans > bifurcated axial fans

A range of 9 standard sizes of bifurcated axial flow fans available as direct driven or belt driven units. The Aero-foil section impeller blades with their non-overload characteristics are ideal where system resistance is unsure.

Inline Fume Extraction
These Bifurcated fans are recommended for high volume, low resistance systems. The fan can be installed at any angle in a duct line with its motor compartment isolated from fumes.
For horizontal or near horizontal positions a drain plug can be fitted at the lowest part of the casing. To give even more flexibility the fans can be supplied in a belt driven arrangement.

Fan Casing - Fabricated from rigid PVC or Polypropylene.

Impeller - Multi-Wing design, moulded polypropylene.

Motors
Brook Crompton or equal, all in compliance with B.S. 5000 and B.S. 4999 with standard motors IP55 which can be upgraded to suit customer requirements.

General Specification
There are eight standard sizes in the bifurcated range B250 through to B760, giving volumes from 0.1m3/sec to 6m3/sec at pressures up to 490Pa. Mounting brackets, flexible connections and anti vibration mountings to suit each unit are available if required.

BIF Series Datasheet (.pdf format 97KB). Contains:

• Dimensional drawings
• Duty Information

APMG Ltd
Mount Skip Lane
Little Hulton
Manchester
M38 9AL